For other actions this field is not valid.

 

 

Set Base type

SetBaseTyp, is used to specify whether the base off set is to be set to an

 

absolute value, or some value is to be added to existing base offset value to

 

calculate new base offset value or the new base offset value is to be computed

 

using some value in the packet. This field is valid only if the ActVal is SetBase.

 

 

Shift Count

ShiftCount is the number of times the Value in the packet is to be shifted before

 

multiplying it with the Mplr. This field is valid only if the ActVal is SetBase. Value

 

32 is used to set shift count to an invalid value.

 

 

Multiplier

Multiplier is used to multiply the value shifted by ShiftCount. It is used to calculate

 

the new base offset. This field is valid only if the ActVal is SetBase.

 

 

Description

Description of the profile node. If the ActVal is FwdToCtl or CpToCtl then this field

 

is mandatory and it can be used by the applications to receive the packets

 

coming from control plane because of this node.

 

 

5.13.14Clfr tree profile Commands5.13.14.1Get clfr tree profile

Description:

Use this command to get.

Command Syntax:

get clfr tree profile [tname <tname-val>] [pid <pid-val>]5.13.14.2 Create clfr tree profile

Description:

Use this command to create.

Command Syntax:

create clfr tree profile tname <tname-val>pid<pid-val>pname<pname-val> [isroot <isroot-val>]

5.13.14.3 Delete clfr tree profile

Description:

Use this command to delete.

Command Syntax:

get clfr tree profile tname <tname-val>pid <pid-val>

IP DSLAM

367