5.6.14Transparent Bridging Table Commands5.6.14.1Modify bridge tbg info

Description:

Use this command to modify.

Command Syntac:modify bridge tbg info [aging <aging-timeout> ] [slaveaging <aging-timeout> ]

[netaging <aging-timeout> ] [ floodsupport enable disable ] [ bcastsupport enable disable] [ mcastsupport enable disable ] [ mcastdrop enable disable ] [ dropiffdbfull <dropiffdbfull-val> ] [ resnetlearning <resnetlearning-val> ] [resvmacprofileid <resvmacprofileid-val> ]

5.6.14.2 Get Bridge tbg info

Description:

Use this command to get bridging related global information.

Command Syntax: get bridge tbg info

Parameters:

Name

Description

 

 

Aging <aging-timeout>

The timeout period, in seconds, for aging out dynamically learned

 

forwarding information from CPEs. The value 0 can be configured

 

when aging is to be stopped.

 

Type: Modify Optional

 

Valid values: 10 -1000000

 

 

slaveaging

The timeout period, in seconds, for aging out dynamically learned

<aging–timeout>

forwarding information learned from the slave device. The

 

recommended value for this is more than or equal to the value for

 

dot1dTpAgingTimeOut. The value 0 can be configured when aging is to

 

be stopped.

 

Valid values: 10 -1000000

 

 

netaging <aging –

The timeout period, in seconds, for aging out dynamically learned

timeout>

forwarding information from NET side port. This is used only for full

 

bridge configuration. The recommended value of net aging timeout

 

should be greater than that of the ìAgingî parameter. The value 0 can

 

be configured when aging is to be stopped.

 

Valid values: 10 -1000000

 

 

IP DSLAM

205