Description:
Use this command to get.
Command Syntax: get bridge tbg traps5.6.10.2 Modify bridge tbg trapsDescription:
Use this command to modify.
Command Syntax:
modify bridge tbg traps [bindingstatus enable disable] [fdbtrapstatus enable disable] [vmactrapstatus enable disable] [traploss Ok Notok]
Parameters:
Name | Description |
|
|
bindingstatus enable | This parameter allows the user to enable or disable the generation of 'binding |
disable | status changed' trap. This trap is sent when the port binding of a unicast entry |
| changes, i.e. the same address is learnt on a different port in the same |
| Forwarding Database. |
| Type: Modify － Optional |
|
|
fdbtrapstatus enable | This parameter allows the user to enable or disable the generation of |
disable | forwarding table trap. This trap is sent when an entry in the forwarding table is |
| learnt/ created/modified/deleted or aged out. These traps shall be given by |
| the packet filter module to the applications registered for these traps. |
| Type: Modify － Optional |
|
|
vmactrapstatus | This parameter allows the user to enable or disable the generation of trap |
enable disable | when MAC to Virtual MAC mapping for the MAC address is not found in the |
| M2VMac database associated with the corresponding interface. These traps |
| shall be given by the packet filter module to the applications registered for |
| these traps. |
| Type: Modify － Optional |
|
|
traploss Ok Notok | This parameter tells whether the loss of binding status and forwarding table |
| trap is acceptable or not. Such a trap can be lost because of the unavailability |
| of resources. ‘OK’ means trap loss is acceptable. In this case, when the trap |
| is lost an indication shall be given to the application, which can then |
|
|
IP DSLAM | 195 |
|
|