Default value: enable

 

 

darpfailedhandling Drop

This specifies the action to be taken on an ARP packet received on

TransparentForward

this VLAN for which it is not possible to determine a single port

FloodTrustedPorts

using (VLANId, IP address) to bridge port mapping learnt using

 

DRA. If the value is drop, the ARP packet will be dropped. If the

 

value is Transparent Forwarding, the ARP packet will be forwarded

 

as per the normal bridging. If the value is FloodTrustedPorts, the

 

ARP packet will be forwarded as per the normal bridging, but only

 

on ports that are trusted.

 

Type:

Create

--

Optional

 

 

Modify

--

Optional

 

Default value: FloodTrustedPorts

 

 

drabcasttoucast Enable Disable

This Parameter is used to configure whether DHCP broadcast

 

packet received for this vlan will be converted to unicast packet or

 

not.

 

 

 

 

Type:

Create

--

Optional

 

 

Modify

--

Optional

 

Default value: Disable

 

 

bngmac <bngmac-val>

This is used to configure BNG Mac address of this VLAN. If VLAN

 

is configured to convert DHCP broadcast packets to Unicast

 

packets,then this MAC address is used as destination MAC

 

address.

 

 

 

Type:

Create

--

Optional

 

 

Modify

--

Optional

 

Default value: "\xff\xff\xff\xff\xff\xff"

 

 

drastatus Enable Disable

This Parameter specifies the status of DRA whether it is enabled

 

for this Vlan or not. If enabled DRA will Act as per the port

 

configuration on which DHCP packet is received. If disabled DRA

 

will not perform any action on the DHCP packets received over this

 

vlan.

 

 

 

 

Type:

Create

--

Optional

 

 

Modify

--

Optional

 

Default value: Enable

 

 

piastatus Enable Disable

This Parameter specifies the status of PIA whether it is enabled for

 

this Vlan or not. If enabled PIA will Act as per the port configuration

 

on which PPPoE packet is received. If disabled PIA will not

 

perform any action on the PPPoE packets received over this vlan.

 

Type:

Create

--

Optional

 

 

Modify

--

Optional

 

Default value: Enable

 

 

 

 

 

666

IDL series User Guide