sent in response to Leave Group messages, and is also the

 

amount of time between Group-Specific Query messages. The

 

value of this parameter may be tuned to modify the leave latency

 

of the network. A reduced value results in reduced time to

 

detect the loss of the last member of a group. The unit of this

 

parameter is one-tenth of second.

 

 

Robustness Variable

This parameter allows tuning for the expected packet loss on a

 

subnet. The IgmpSnooping module is robust to [RobustnessVar]

 

packet losses.

 

 

Igmp Snoop Status

This parameter specifies whether Igmp Snooping needs to be

 

enabled in the system.

 

 

Version Mask

This parameter controls which versions of IGMP are currently

 

supported at Columbia. Depending on the version mask, IGMP

 

messages of unsupported version, will be dropped

 

 

Report Suppression

Report Suppression is enabled or not.

Status

 

 

 

Proxy Report Status

This parameter controls whether proxy reporting will be

 

supported at the global level.

 

 

StartUp QryCount

This parameter specifies the number of General Queries sent on

 

receiving Port Up topology change trigger, separated by the

 

StartupQryInterval

 

 

Last Member QryCount

This parameter specifies the number of Group-specific or

 

Group-and-Source-specific Queries sent before assuming there

 

are no listener for this Group or Group-Source pair.

 

 

5.14.2Igmpsnoop mvlan config Commands5.14.2.1Get igmpsnoop mvlan config

Description:

Use this command to get.

Command Syntax:

get igmpsnoop mvlan config [grpipaddr <grpipaddr-val>] [srcipaddr

<srcipaddr-val>] [vlanid <vlanid-val> none]

IP DSLAM

451