
Cautions:
zAn entry in this table shall not be applicable for a bridge port created over PPPOE/IPOE interface.
References:
zbridge static multicast
5.7.2Bridge mcast forwarding Commands5.7.2.1 Get bridge mcast forwardingDescription:
Use this command to get.
Command Syntax:
get bridge mcast forwarding [vlanidParameters:
| Name | Description | 
| 
 | 
 | 
| vlanid  | The VLAN id for this VLAN. In devices supporting "Shared Vlan for | 
| 
 | multicast" capability, the information for a multicast MAC address is | 
| 
 | shared across VLANS. Hence, vlanid is not required and is passed as | 
| 
 | zero. In devices supporting "Independent Vlan for multicast" capability. | 
| 
 | Each vlan can have its own information for a multicast MAC address. | 
| 
 | Hence, VLAN id is a mandatory parameter and a valid value of vlanid | 
| 
 | must be passed. For No Vlan case VLAN id is not required. When Vlan | 
| 
 | transparency feature is supported, the valid range for vlanid also | 
| 
 | includes 4097. In case of "Shared Vlan Multicast also there shall always | 
| 
 | be a seperate entry for 4097 if the VLAN with that VLAN Id is created. | 
| 
 | VLAN here means the 802.1q Vlan in case of Native Vlan mode and | 
| 
 | Virtual Vlan in case of Stacked Vlan Mode. | 
| 
 | Type: Modify - Optional | 
| 
 | Get - Optional | 
| 
 | Valid values: 0 - 4095 | 
| 
 | 
 | 
| macaddr | The destination Group MAC address in a frame, to which this entry's | 
| filtering information applies | |
| 
 | Type: Get  | 
| 
 | 
 | 
| 212 | IDL series User Guide | 
| 
 | 
 |