5.6.6 Bridge Port Starts Table Commands

5.6.6.1 Get bridge port stats

Description:

Use this command to get the statistics of a single port, or all the ports.

Command Syntax:

get bridge port stats [portid <portid-val>]

5.6.6.2 Reset bridge port stats

Description:

Use this command to reset bridge port statistics.

Command Syntax:

reset bridge port stats portid <portid-val>

Parameters:

Name

Description

 

 

portid

This is the bridge port identifier. If this is not specified in

<portid-val>

the get command, then information for all ports is

 

displayed.

 

Type : Get － Optional

 

Reset － Mandatory

 

Valid values : 1- 578

 

 

Example:

$ get bridge port stats portid 1

Output:

 

 

 

Verbose Mode On

 

 

 

PortId

: 1

Max Info Size

: 1500

Out Frames

: 138

In Frames

: 129

In Discards

: 3

 

 

HC In Frames

: 300

 

 

HC Out Frames

: 350

 

 

HC In Discards

: 400

 

 

IP DSLAM

181