Init Fail Trap | Enables and disables the InitFailureTrap. This object is defaulted |
| disable. |
|
|
OpStateTrapEnable | Enables/disables the OpStateChangeTrap |
|
|
PowerMgmtTrapEnable | This indicates change in power mangement state |
|
|
Thresh 15Min Lofs(sec) | The number of Loss of Frame Seconds encountered by an ADSL |
| interface within any given 15 minutes performance data collection |
| period, which causes the SNMP agent to send an |
| 'adslAturPerfLofsThreshTrap' |
|
|
Thresh 15Min Loss(sec) | The number of Loss of Signal Seconds encountered by an ADSL |
| interface within any given 15 minutes performance data collection |
| period, which causes the SNMP agent to send an |
| 'adslAturPerfLossThreshTrap' |
|
|
Thresh 15Min Lprs(sec) | The number of Loss of Power Seconds encountered by an ADSL |
| interface within any given 15 minutes performance data collection |
| period, which causes the SNMP agent to send an |
| 'adslAturPerfLprsThreshTrap' |
|
|
Thresh 15Min Ess(sec) | The number of Errored Seconds encountered by an ADSL |
| interface within any given 15 minutes performance data collection |
| period, which causes the SNMP agent to send an |
| 'adslAturPerfESsThreshTrap' |
|
|
Thresh Fast Rate Up(bps) | Applies to 'Fast' channels only. Configured change in rate |
| causing an adslAturRateChangeTrap A trap is produced when: |
| ChanCurrTxRate > ChanPrevTxRate plus the value of this object. |
|
|
Thresh Intl Rate Up(bps) | Applies to 'Interleave' channels only. Configured change in rate |
| causing an adslAturRateChangeTrap A trap is produced when: |
| ChanCurrTxRate > ChanPrevTxRate plus the value of this object. |
|
|
Thresh Fast Rate | Applies to 'Fast' channels only. Configured change in rate |
Down(bps) | causing an adslAturRateChangeTrap A trap is produced when: |
| ChanCurrTxRate < ChanPrevTxRate minus the value of this |
| object. |
|
|
Thresh Intl Rate | Applies to 'Interleave' channels only. Configured change in rate |
Down(bps) | causing an adslAturRateChangeTrap A trap is produced when: |
| ChanCurrTxRate < ChanPrevTxRate minus the value of this |
| object. |
|
|
References:
zADSL Commands
228 | IDL series User Guide |
|
|