
| Type: Modify - Optional |
| Valid values: 1 |
|
|
maxmulticast | Maximum number of multicast groups that can be |
configured in the system | |
| Type: Modify - Optional |
| Valid values: 1 - 4 |
|
|
maxmac | Maximum number of MAC addresses that can be learned by |
| the system. This should be a multiple of 32 |
| Type: Modify - Optional |
| Valid values: 1 - 4000 |
|
|
maxhashbuck | Maximum number of hash buckets for the Forwarding table. |
This value should be a power of 2. (1, 2, 4, 8 ,...) | |
| Type: Modify - Optional |
| Valid values: 1 - 8192 |
|
|
maxnumvlan | Maximum number of VLANs that can be configured on the |
Bridge either statically or dynamically | |
| Type: Modify - Optional |
| Valid values: 0 - 512 |
|
|
maxvlanidval | Maximum value of VLAN ID that this Bridge can support |
Type: Modify - Optional | |
| Valid values: 1 - 4095 |
|
|
maxnumacentry | Maximum number of Static UCast Entries that can be |
configured on the Bridge | |
| Type: Modify - Optional |
| Valid values: 0 - 512 |
|
|
devcap IVL SVL none | Device Capabilities of |
| Vlan Mode this shall apply to Virtual Vlans. Type: Modify - |
| Optional |
|
|
bridgingmode Restricted | This specifies the state of full bridging on the bridge. Value |
Unrestricted | residential species that packets coming from CPE side |
Residential | would be forwarded to the net side port without a lookup. In |
| case of restricted bridging, the packets would undergo a |
| lookup and if the destination is another CPE port, the packet |
| would be dropped, i.e. CPE to CPE traffic is not allowed. |
| Unrestricted bridging is forwarding based on lookup in all |
| cases. |
| Type: Modify - Optional |
|
|
maxhpriotreenodes | Maximum number of classifier tree nodes of high access |
priority that can be created. | |
| Type: Modify - Optional |
|
|
620 | IDL series User Guide |
|
|