the system and each RID defines separate routes in context

 

of itself. . If VlanId <X> and RID <X> have been created and

 

the routing database is configured for IRD, than routes in RID

 

<X> shall define flow for packets coming on VLAN Id <X>.

 

The other mode for the database is SRD( Shared Routing

 

Database) where there is a single RID in the system and all

 

flows map to this RID. This RID has to be explicitly created

 

and no more than one RID can be created in the system in

 

this mode. Flows for all created VLANs shall map to this RID

 

for routing.

 

 

Ifname

This specifies the physical interface for the media. It

 

indicates the interface over which the IP address for which

 

the IP Net to media mapping has been created can be

 

reached.

 

 

Ip Address.

IP address corresponding to the media-dependent physical

 

address.

 

 

Type

This defines the type of mapping in use. The value Invalid

 

has the effect that this entry is not used. It may be: Static,

 

Dynamic, Other

 

 

Mac Address

The media-dependent physical address

 

 

Cautions:

zThe specified interface should pre-exist. Please refer to the create ethernetintf command.

References:

zdelete arp command

zget arp command

zcreate ethernet intf command

zip route related commands

5.16.2IP Route Commands5.16.2.1 Get ip route

Description:Use this command to get.

Command Syntax:

get ip route [rid <rid-val>] ip <dest-ip-address> mask <net-mask>

IP DSLAM

471