5.6.4 Bridge port forwarding Commands5.6.4.1 Get bridge port forwarding

Description:

Use this command to get.

Command Syntax:

get bridge port forwarding [portid <portid-val>] [vlanid <vlanid-val>] [macaddr

<macaddr-val>]

5.6.4.2 Delete bridge port forwarding

Description:

Use this command to delete.

Command Syntax:

delete bridge port forwarding portid <portid-val> [vlanid <vlanid-val>]

[macaddr <macaddr-val>]

Parameters:

Name

Description

 

 

portid <portid-val>

Port number of the port on which a frame having a source address equal to

 

the value of the corresponding instance of dot1qTpFdbAddress, has been

 

seen. This may have a value of "0" if the statically configured address has a

 

dynamic port binding and the port has not been learnt yet.

 

Type: Delete － Mandatory

 

Get － Optional

 

Valid values: 1 - 386

 

 

vlanid <vlanid-val>

Vlan Id to uniquely identify the entry for which the bridge has forwarding

 

and/or filtering information. To delete an individual learned entry or all

 

learned entries, the FdbId should be set to a valid value in case of IVL. In

 

SVL case, this value is ignored except when the value is 4097, which is the

 

value of a special Vlan Id used for managing the traffic for those VLANs that

 

are neither created nor learned in the system. When Vlan transparency

 

feature is supported, the valid range for this also includes 4097. VLAN here

 

means the 802.1q Vlan in case of Native Vlan mode and Virtual Vlan in case

 

of Stacked Vlan Mode.

 

Type: Delete － Optional

 

Get － Optional

 

 

IP DSLAM

177