Output field:

Field

Description

 

 

Port Id

Bridge Port Identifier

 

 

VLAN

VLAN identifier. In case of stacked mode this is virtual

 

VLAN

 

 

Profile Id

PIA profile identifier. This shall be used for this PIA

 

Instance

 

 

PIA status

Used to enable or disable PPPOE intermmediate agent

 

for this instance

 

 

PIAVsaOption

This specifies the action to be performed on VSA Tag on

 

receiving PPPoE discovery packets for this instance. If

 

disabled PIA will not add VSA tag to the PPPoE packets.

 

If AddAlways is set then VSA tag is always added. If

 

AddIfNotExists is set then VSA tag is added only if the

 

received packet does not contain the VSA tag.

 

 

Config Sub Options

This bitmask is used to indicate which all parameters are

Bitmask

configured for this instance. Parameter bit set in this

 

bitmask will overwrite the automatically derived values of

 

agent circuit Id and/or port id by the values configured in

 

this MO.

 

 

Agent Circuit Id

This is use to configure Agent Circuit Id for this instance.

 

If ACI bit is set in gsvPiaConfigSubOptionBitmask then

 

this parameter will overwrite the generated Agent Circuit

 

Id

 

 

Remote Agent Id

This is used to configure Remote Agent Id for this

 

instance. This parameter uniquely identifies the

 

subscriber on the associated access loop logical port on

 

Columbia.

 

 

SyncRateInfoField

This bitmask is used to indicate what all access loop

Bitmask

characteristic parameters are to be added to access loop

 

characteristic suboption.

 

 

Act for IWFTag From

This field specifies the Action to be taken on receiving

Client

PPPoE discovery msg with IWF suboption from client. It

 

can be configured as either drop or forward. Default

 

action is to drop the packet silently.

 

 

Insert Iwf Subop

This is used to indicate whether to add IWF suboption to

 

Columbia originated PPPoE discovery packets received

 

for this instance. This field is valid only for PPPOAE

 

interface.

 

 

Port No

This field specifies Atm Port number.Its value is

 

 

530

IDL series User Guide