
This section describes how to configure the transmission rate manually via CLI. Before configuration, see follows.
| 1. | Input the line rate by using hexadecimal values. Following tables shows the | ||||||||
| 
 | hexadecimal values that are frequently used. | 
 | 
 | 
 | 
 | ||||
| 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
 | |
| Hexadecimal | 0x1f38300 | 0x177000 | 0x109a00 | 0x7d000 | 0x1f400 | 0xfa00 | 0x7d00 | 
 | |
| 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
| 
 | Decimal | 32M | 1.5M | 1M | 512K | 128K | 64K | 32K | 
 | 
| 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
 | 
| 2. | Be noted that GsStandard, GsTxPowerAtten and GsAnnexType must be modified | ||||||||
| 
 | at the same time. | 
 | 
 | 
 | 
 | 
 | 
 | 
 | |
| 3. | Frequently used commands are listed below for your reference: | 
 | 
 | ||||||
zaturintlmaxtxrate 0x7d000 atucgsannextype adsl2 atucgsstandard adsl2plus atucgstxpoweratten 0 atucmaxintldelay 1
zatucfastmintxrate 0xfa00 aturfastmintxrate 0x7d00 atucgsannextype annexa atucgsstandard glite atucgstxpoweratten 0 type fastonly atucrateadaptation fixed
| 
 | RATE | type | Standard | Annex type | 
| 
 | 
 | 
 | 
 | 
 | 
| ATUC | Fixed/ Adaptive | Interleaved / fast | Adsl2+ / G.dmt / | Adsl2 / annex A | 
| 
 | 
 | only | G.lite / T1.413 | 
 | 
| 
 | 
 | 
 | 
 | 
 | 
| ATUR | Fixed/ Adaptive | Interleaved / fast | Adsl2+ / G.dmt / | Adsl2 / annex A | 
| 
 | 
 | only | G.lite / T1.413 | 
 | 
| 
 | 
 | 
 | 
 | 
 | 
| IP DSLAM | 81 | 
| 
 | 
 |