'asinrule', subrule priority will be same as specified in the rule.

Transport Header This specifies the type of the transport header in the packet in which the corresponding IP is being transported. If the value of this field is 'Ethernet', then the IP is being carried in the Ethernet header. If it is 'PPPoE', then the corresponding IP is being carried in the PPP header.

References:

zGeneric Filter Commands

5.13.35Filter subrule UDP Commands5.13.35.1 Get Filter subrule udp

Description:

Use this command to get.

Command Syntax:

get filter subrule udp [ruleid <ruleid-val>] [subruleid <subruleid-val>]5.13.35.2 Create filter subrule udp

Description:

Use this command to create.

Command Syntax:

create filter subrule udp ruleid <ruleid-val > subruleid <subruleid-val >

[srcportfrom <srcportfrom-val >] [srcportto <srcportto-val >] [ dstportfrom <dstportfrom-val > ] [ dstportto <dstportto-val > ] [ srcportcmp eq neq lt leq gt geq any inrange exrange ] [ dstportcmp eq neq lt leq gt geq any inrange exrange ] [ subruleprio low high asinrule] [ transporthdr ethernet pppoe ]

5.13.35.3 Delete filter subrule udp

Description:

Use this command to delete.

Command Syntax:

delete filter subrule udp ruleid <ruleid-val > subruleid <subruleid-val >

IP DSLAM

443