Extended PSD Status

Conexant parameter that indicates whether an extended

 

upstream PSD is used - for G.Span Plus mode of

 

operation only. Only supported for G.Span Plus, therefore

 

this parameter is not valid for ADSL2/ADSL2plus modes of

 

operation.

 

 

Chip Version

The DSP version number.

 

 

Pilot Tone

Conexant parameter that indicates the Pilot Tone Index.

 

 

Overhead Channel

Indicates the Overhead Channel. This feature is not

 

supported by DSLPHY as yet.

 

 

Psd Mask

Conexant parameter that indicates the actual Psd Mask

 

currently being used.

 

 

System Vendor ID

Indicates the Vendor ID as inserted by the ATU-C in the

 

Overhead Messages(ADSL2). Typically identifies the

 

ATU-C system integrator which usually refers to the

 

vendor of the smallest field-replaceable unit. ATU-C

 

System Vendor ID may not be the same as ATU-C Vendor

 

ID. It is not available for ADSL. This is string of 8 octets

 

containing 2 octet country code , 4 octet vendor id and 2

 

octet vendor revision number.

 

 

ATU-C Self Test Result

Defines the ATU-C selftest result. The most significant

 

octet is: 00 hex if the self-test passed or 01 hex if the

 

self-test failed. Interpretation of the other octets is vendor

 

discretionary and can be interpreted in combination with

 

G.994.1 and system Vendor IDs.

 

 

Atuc G.994.1 Vendor ID

Indicates the Vendor ID as inserted by the ATU-C in the

 

G.994.1 CL message. Typically identifies the vendor of the

 

ATU-C G.994.1 functionality. This is string of 8 octets

 

containing 2 octet country code , 4 octet vendor id and 2

 

octet vendor revision number.

 

 

Atuc ACTPSDus (dB/10)

This parameter defines the average upstream transmit

 

power spectrum density over the used subcarriers

 

delivered by the ATU-C at the U-C reference point, at the

 

instant of measurement. It's value ranges from -90 to 0, in

 

0.1 dB/Hz steps. It is available only for ADSL2/ADSL2plus.

 

 

AtucStartBin (GSpan++)

This Gspan++ parameter indicates the start bin of the bit

 

loading up array.

 

 

StartUp Error Code

Conexant parameter which indicates the startup error

 

code.

 

 

BitSwapCount

This Conexant parameter indicates the bit swap count. It

 

can read only in data mode

 

 

IP DSLAM

251