
5.7 Bridge Multicast Commands
5.7.1 Bridge mcast forwarding Commands
5.7.1.1 Get bridge mcast forwarding
Description:
Use this command to get.
Command Syntax:
get bridge mcast fwdall [vlanid <vlanid-val>] 
5.7.1.2 Modify bridge mcast fwdall
Description:
Use this command to modify.
Command Syntax:
modify bridge mcast fwdall [vlanid <vlanid-val>]  [egressports
Parameters:
| Name | Description | 
| 
 | 
 | 
| vlanid  | The VLAN id for this VLAN. In devices supporting "Shared Vlan | 
| 
 | for multicast" capability, the information for a multicast MAC | 
| 
 | address is shared across vlans. Hence vlan id is an optional | 
| 
 | parameter. In devices supporting "Independent Vlan for | 
| 
 | multicast" capability, each vlan can have its own information for | 
| 
 | a multicast MAC address. Hence vlanid is a mandatory | 
| 
 | parameter in all the commands other than - get. For No Vlan | 
| 
 | case, vlan id is not required. VLAN here means the 802.1q Vlan | 
| 
 | in case of Native Vlan mode and Virtual Vlan in case of Stacked | 
| 
 | Vlan Mode. | 
| 
 | Type: Get - Optional | 
| 
 | Valid values: 0 - 4095 | 
| 
 | 
 | 
| egressports | The set of ports, configured by management in this VLAN, to | 
| which all multicast  | |
| 
 | forwarded. More than one value can be given, separated by | 
| 
 | spaces. | 
| 
 | Type: Modify  | 
| 
 | Valid values: 0 | 
| 
 | 
 | 
| forbidegressports | The set of ports configured by management in this VLAN, for | 
| 
 | 
 | 
| 210 | IDL series User Guide | 
| 
 | 
 |