Planet Technology IDL-2400, IDL-2401, IDL-4800, IDL-4801 manual 551

Output:
Verbose Mode On
Entry Created
Profile Id : 1
Level		: packet	Type		: trtcm
Rate		: 24	Max Burst Size		: 24
Peak Rate		: 30	Peak Max Burst Size : 30
Verbose Mode Off:
Entry Created
Output field:
	Field			Description
	Profile Id			Rate limiter's configuration profile identifier,
				whichuniquely identifies the configuration profile.
				The configuration profile contains all parameters
				required for rate limiting algorithm to operate.
	Level			Level of the rate limiter identifies whether the
				algorithm executes in terms of number of packets
				or number of bytes.If the 'level' is 'packet'(1), rate is
				configured in terms of packets per second and
				burst size is configured in terms of number of
				packets.If the 'level' is 'byte'(2), rate is configured
				in terms of bits per second and burst size is
				configured in terms of number of bytes.
	Type			Type identifies the algorithm for rate limiting.The
				sr2cm (single rate two color marker) is a
				single-rate algorithm. It takes rate and burst size
				as input parameters.The trtcm (two rate three color
				marker) is a dual-rate algorithm. It takes two sets
				of rate and burstsize as inputs, one each for peak
				and committed information.
	Rate			This field defines the committed information rate. If
				'level' is 'packet'(1), the unit is packets per second.
				If 'level' is 'byte'(2), the unit is bits per second.
	Max Burst Size			This field defines the committed burst size. If 'level'
				is 'packet'(1), the unit is number of packets. If
				'level' is 'byte'(2), the unit is number of bytes.
	Peak Rate			This field is relevant only if 'type' is 'trtcm'(2). This
				field defines the peak information rate. If 'level' is
				'packet'(1), the unit is packets per second. If level

IP DSLAM 551