Output::

None

Caution:

None.

References:

user command

5.25.4System crash info Commands5.25.4.1Get system crash info

Description:

T This command is used to display a list of crashes that were encountered by the system. This command is not supported on the Flashless system.

Command Syntax:

get system crash info [numentries <numentries-val>] [showview [general ctrlandstatusregs stackregs stackinfo altwinregs stdwinregs stdwinregsdetailed coprocessorregs] +]

Parameters:

Name

Description

Numentries

This specifies the last <numentries> number of crashes

<numentries-val>

encountered in the system.

 

Type: Optional

 

Valid values: 1 to 128

 

Default : 1

 

 

showview general

The optional showview parameter shall help the user to view

ctrlandstatusregs

selective details of the crash dump. The information on any one

stackregs stackinfo

or combination of crash dump sections can be retrieved by

altwinregs stdwinregs

ORing the following parameters:

stdwinregsdetailed

•general

coprocessorregs]+

•ctrlandstatusregs

 

•stackregs

 

•stackinfo

 

•altwinregs

 

•stdwinregs

 

•stdwinregsdetailed

 

 

600

IDL series User Guide