accepted values is 00:30:4F:00:00:00 to 00:30:4F:7F:FF:FF.

 

 

Port Index

This parameter specifies a bridge port belonging to the Vlan

 

(igmpVlanIndex) and Group (igmpsnoopMcastAddress), for which the

 

IgmpSnooping statistics are desired.

 

 

Query Received

This parameter specifies thenumber of Igmp queries received on the

 

port belonging to a particular multicast group and Vlan.

 

 

Report Received

This parameter specifies thenumber of Membership reports received on

 

the port belonging to a particular multicast group and Vlan.

 

 

Filter Mode

This parameter specifies the current filter mode on a port for a given

 

group.

 

 

Include SrcList

This parameter specifies the Include Source list, which is the list of

 

sources to be included in case of Include filter mode and the list of

 

conflicting sources in case of exclude mode of the port for a given group

 

 

Exclude SrcList

This parameter specifies the Exclude Source list, which is the list of

 

sources to be excluded in case of exclude filter mode of the port for a

 

given group

 

 

Caution:

zAn entry in this table shall not be applicable for a bridge port created over the PPPoE interface.

5.14.5Igmpsnoop querier info Commands5.14.5.1 Get igmpsnoop querier info

Description:

Use this command to get.

Command Syntax:

get igmpsnoop querier info [vlanid <vlanid-val >] [portid <portid-val>]5.14.5.2 Create igmpsnoop querier info

Description:

Use this command to create.

Command Syntax:

create igmpsnoop querier info vlanid <vlanid-val > portid <portid-val >

IP DSLAM

461