5.19.5.2 Create pppoe intf

Description:

Use this command to create.

Command Syntax:

create pppoe intf ifname <interface-name>lowif <lowif –val>[wanbridgeport <wanbridgepor-val>t ] [sessionid <sessionid-val> ] [ acmacaddr <acmacaddr-val> ] macaddrprof <macaddrprof-val> [ servicenameprof <servicenameprof-val> any anyconfigured ] [ acnameprof <acnameprof-val> any anyconfigured ] [ ethpkttype Type2 802_3 ] [ nature dynamic static ]

[ enable disable ]

5.19.5.3 Delete pppoe intf

Description:

Use this command to delete.

Command Syntax:

delete pppoe intf ifname <interface-name>

5.19.5.4 Modify pppoe intf

Description:

Use this command to modify.

Command Syntax:

modify pppoe intf ifname <interface-name> lowif <lowif –val>[ wanbridgeport <wanbridgepor-val>t ] [sessionid <sessionid-val> ] [ acmacaddr <acmacaddr-val> ] macaddrprof <macaddrprof-val> [ servicenameprof <servicenameprof-val> any anyconfigured ] [ acnameprof <acnameprof-val> any anyconfigured ] [ ethpkttype Type2 802_3 ] [ nature dynamic static ]

[ enable disable ]

Parameters:

 

 

 

Name

Description

 

 

 

 

 

 

 

 

 

 

lowif <lowif-val>

This specifies the lower interface index. It contains the ifindex of the

 

 

 

 

 

PPP relay interface.

 

 

 

 

 

Type: Create － Mandatory

 

 

 

 

 

Valid values: 0 - 254

 

 

 

 

 

 

 

 

 

 

wanbridgeport

WAN side bridge port. A value of zero means any WAN side port is

 

 

 

 

<wanbridgeport-val>

acceptable. Currently, only value zero is supported.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

502

 

 

IDL series User Guide