if any ATM VC is created on top of this ATM port.

 

 

Mirror Mode

This field configures ATM port in data mode or mirror mode. In mirror mode,

 

only the mirrored packets are allowed to go out of the port and regular

 

customer data is forbidden. Scheduling profile field is ignored in mirror mode.

 

 

Oper Status

The actual/current state of the interface. It can be either up or down.

 

 

Admin Status

The desired state of the interface. It may be either Up or Down.

 

 

5.5.5ATM VC Commands5.5.5.1Create atm vc intf

Description:

Use this command to create a new ATM Virtual Circuit (VC).

Command Syntax :

create atm vc intf ifname <interface-name> vpi <vpi-val> vci <vci-val> lowif <atm-port-interface-name> [enable disable] [aal5] [a5txsize <aal5-cpcs-tx-sdu-size>] [a5rxsize <aal5-cpcs-rx-sdu-size>] [vcmux llcmux auto ethernet] [pvc] [channel fastinterleaved] [ mgmtmode datamgmtDataAndMgmt raw] [ maxnumproto <maxnumproto-val> ]

[ autostatus EnableDisable ] [ autosupportedprot none{pppoa eoa ipoa}+] [ autovcmuxforcedprot None pppoa eoa ipoa] [ autosensetriggertype dynamic opstatechange ] [ ctlpktgroupid <ctlpktgroupid> none ]

5.5.5.2 Delete atm vc intf

Description:

Use this command to delete an existing ATM Virtual Circuit (VC).

Command Syntax:

delete atm vc intf ifname <interface-name>5.5.5.3 Get atm vc intf

Description:

Use this command to display information corresponding to a single VC, or for all VCs.

Command Syntax: get atm vc intf [ifname <interface-name>]

IP DSLAM

163