Description:
Use this command to reset STP global statistics.
Command Syntax: reset stp statsParameters:
| Name | Description |
|
|
|
|
|
|
|
|
|
|
|
| Priority | The value of the |
|
|
| |
|
| first two octets of the (8 octet long) Bridge ID. The other |
| |||
|
| (last) 6 octets of the Bridge ID are given by the value of |
| |||
|
| dot1dBaseBridgeAddress. |
| |||
|
| Type | : Optional |
| ||
|
| Valid values: 0 - 65535. |
| |||
|
|
|
| |||
| Maxage | The maximum age of Spanning Tree Protocol information |
|
|
| |
| learned from the network on any port before it is discarded, |
| ||||
|
| in units of seconds. This is the actual value that this bridge |
| |||
|
| is currently using. |
|
|
|
|
|
| Type | : Optional |
| ||
|
| Valid values: 6 - 40. |
| |||
|
|
|
| |||
| htime | The amount of time between the transmission of |
|
|
| |
|
| Configuration bridge PDUs by this node on any port when it |
| |||
|
| is the root of the spanning tree or trying to become so, in |
| |||
|
| units of second. This is the actual value that this bridge is |
| |||
|
| currently using. |
|
|
|
|
|
| Type | : Optional |
| ||
|
| Valid values: 1 - 10 |
| |||
|
|
|
| |||
| Fdelay | This is the actual time value, measured in units of seconds, |
|
|
| |
|
| controls how fast a port changes its spanning state when |
| |||
|
| moving towards the Forwarding state. The value |
| |||
|
| determines how long the port stays in each of the Listening |
| |||
|
| and Learning states, which precede the Forwarding state. |
| |||
|
| This value is also used, when a topology change has been |
| |||
|
| detected and is underway, to age all dynamic entries in the |
| |||
|
| Forwarding Database. |
| |||
|
| Type | : Optional |
| ||
|
| Valid values: 4 - 30 |
| |||
|
|
|
| |||
| Enabledisable | Spanning Tree Protocol to be enabled on the Bridge or not. |
|
|
| |
|
| Spanning Tree Protocol can not be enabled in Stacked Vlan |
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IP DSLAM |
|
|
| 199 |
| |
|
|
|
|
|
|
|