be dropped. If action is "transparently forward", then IGMP frames

 

 

 

received for this Vlan shall be forwarded transparently and learning

 

 

 

will not be done

 

 

 

 

 

 

 

Type:

Create

--

Optional

 

 

 

 

Modify

--

Optional

 

 

 

Default value: Learn

 

 

 

 

 

 

igmpsnoopproxyreporting

This parameter provides a configuration option to choose between

 

 

 

 

Enable Disable

transparent snooping or Proxy reporting behavior per Vlan.

 

 

 

Depending on the type of mode, IGMP module will perform either

 

 

 

transparent snooping or proxy reporting for the IGMP messages,

 

 

 

received on a Vlan. Here the Vlan which is being referred is the

 

 

 

one on which learning will happen. It will be multicast vlan, if

 

 

 

"Multicast Vlan option" is enabled.

 

 

 

Type:

Create

--

Optional

 

 

 

 

Modify

--

Optional

 

 

 

Default value: Disable

 

 

 

 

 

 

igmpsnoopingressprio

This parameter specifies the ingress priority to be forced on the

 

 

 

 

igmpsnoopingressprio none

incoming frame. If the ingress priority field has valid value, then

 

 

 

that value will be used for traffic class determination and packet

 

 

 

priority. If valid egress priority is configured for a port, then egress

 

 

 

priority shall override the ingress priority. In addition, there is

 

 

 

support of invalid value for ingress priority to indicate that the

 

 

 

priority is not to be forced on ingress frame for this port.Here the

 

 

 

Vlan which is being referred is the one on which learning shall

 

 

 

happen. It will be multicast vlan, if "Multicast Vlan option" is

 

 

 

enabled.

 

 

 

 

 

 

 

Type:

Create

--

Optional

 

 

 

 

Modify

--

Optional

 

 

 

Valid values: 0 -7

 

 

 

 

 

 

Additional Values: 8

 

 

 

Default value: 8

 

 

 

 

 

 

 

 

 

 

darpstatus Enable Disable

This specifies whether ARP packets received on this VLAN are to

 

 

 

 

 

be directed to a single port using (VLANId, IP address) to bridge

 

 

 

port mapping learnt using DRA. This attribute is effective in

 

 

 

conjunction with the attribute 'gsvDot1dPortDirectedARP' of

 

 

 

'Dot1dBasePortExtTable' MO. ARP packets are to be directed as

 

 

 

mentioned above, only if both the flags are enabled. If any of the

 

 

 

two is disabled, the ARP packets will be forwarded as per the

 

 

 

normal bridging flow.

 

 

 

Type:

Create

--

Optional

 

 

 

 

Modify

--

Optional

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

IP DSLAM

 

 

 

 

 

665