Valid values: 1 - 578

 

 

portvlanid

The VLAN Identifier.

<portvlanid-val>

Type: Modify Optional

 

Valid values: 1 - 4095

 

 

acceptframetypes all

When this is Tagged, the device will discard untagged

tagged

frames or Priority-Tagged frames received on this port. When

 

All, untagged frames or Priority-Tagged frames received on

 

this port will be accepted and assigned to the PVID for this

 

port.

 

Type: Modify Optional

 

 

ingressfiltering False

When this is true, the device will discard incoming frames

True

for VLANs, which do not include this Port in its Member set.

 

When false, the port will accept all incoming frames.

 

Type: Modify Optional

 

Valid values: False, True

 

 

gvrpstatus enable

The state of GVRP operation on this port. The value 'enable',

disable

indicates that GVRP is enabled on this port, as long as

 

'gvrpstatus' in 'GVRP INFO' command is also enabled for this

 

device. When this is 'disable', even if 'gvrpstatus' in 'GVRP

 

INFO' command is 'enable' for the device, GVRP will be

 

'disable' on this port. In such a case, any GVRP packets

 

received will be silently discarded and no GVRP registrations

 

will be propagated from other ports. This object affects all

 

GVRP Applicant and Registrar state machines on this port.

 

This configuration shall not be effective for a bridge port

 

created over PPPOE/IPOE interface.

 

Type: Modify Optional

 

 

restrictedvlanreg

The state of Restricted VLAN Registration on this port. If the

False True

value of this control is true(1), then creation of a new

 

dynamic VLAN entry is permitted only if there is a Static

 

VLAN Registration Entry for the VLAN concerned, in which,

 

the Registrar Administrative Control value for this port is,

 

Normal Registration. Type: Modify Optional

 

Valid values: False, True

 

 

pktpriority

For the GVRP PDUs generated by the Control Plane, this

<pktpriority-val>

priority shall be used for choice of traffic class/ Queue on

 

outgoing interface. In case the bridge port is over an

 

Aggregated ATM VC, this will also be used to identify the VC,

 

on which the packet is to be sent.

 

Type: Modify Optional

 

 

650

IDL series User Guide