consistent with the mentioned valuetype of generic list.

Value Type This field specifies value type of the entry. The value type for all entries on an interface should be same. Value type should match value type of subrule field for which comparsion type is ingenlist or notingenlist incase the rule containing the subrule is attached on the same interface. It should be 'U32' in case a rule containing IP subrule or Generic subrule with cmptype as InGenList or NotInGenList is attached on same interface. Currently only 'U32' value is supported.

5.13.17Filter namedlist genentry Commands5.13.17.1Get filter namedlist genentry

Description:

Use this command to get.

Command Syntax:

get filter namedlist genentry [listid <listid-val>] [value <value-val>]5.13.17.2 Create filter namedlist genentry

Description:

Use this command to create.

Command Syntax:

create filter namedlist genentry listid <listid-val>value value-val>] [valueto

<valueto-val>]

5.13.17.3 Delete filter namedlist genentry

Description:

Use this command to delete.

Command Syntax:

delete filter namedlist genentry listid <listid-val>value <value-val>

Parameter:

Name

Description

 

 

listid <listid-val>

This field stores the list identifier value. There must be a row indexed on

 

the same id in the Generic Filter Named List Table.

 

Type: Create -- Mandatory

 

 

IP DSLAM

373