5.25.5System info Commands5.25.5.1Get system info

Description:

This command to get system parameters.

Command Syntax: get system info5.25.5.2 Modify system info

Description:

Use this command to modify the system parameters.

Command Syntax:

modify system info [contact <sys-contact>] [name <sys-name>] [location <sys-location>] [vendor <sys-vendor-info>] [logthresh <sys-log-threshold>] [systime <systime>] [dst <on off>] [timezone <timezone>]

Parameters:

Name

Description:

 

 

contact <sys-contact>

This contains the textual identification of the contact person

 

for this modem, together with information on how to contact

 

this person

 

Type: Optional

 

Valid values: String of up to 63 ASCII Characters

 

 

name <sys-name>

This specifies the name of the modem

 

Type: Optional

 

Valid values: String of up to 63 ASCII Characters

 

 

Location <sys-location>

This specifies the physical location of this modem Type:

 

Optional

 

Valid values: String of up to 63 ASCII Characters

 

 

vendor

This contains the vendor-specific information

<sys-vendor-info>

Type: Optional

 

Valid values: String of up to 63 ASCII Characters

 

 

logthresh

This specifies the severity level of the trap equal to or lower

<sys-logthreshold>

than that shall be logged. 1 is the lowest and represents

 

critical traps. Changing the parameter’s value in a flashless

 

system shall have no effect as there is no NVRAM support

 

present to log traps. Type: Optional

 

 

IP DSLAM

609