atuctargetsnr

Configured Target Signal/Noise Margin. This is the Noise Margin the

<atuctargetsnr-val>

modem must achieve with a BER of 10 to the power -7, or better, to

 

successfully complete initialization.

 

Type:

Modify

--

Optional

 

Valid values: 0 - 310

 

 

atucmaxsnrmargin

Configured Maximum acceptable Signal/Noise Margin. If the Noise

<atucmaxsnrmargin-val>

Margin is above this, the modem hould attempt to reduce its power

 

output to optimize its operation.

 

Type:

Modify

--

Optional

 

Valid values: 0 - 310

 

 

atucgsrsintcorrectionup

Sets the correction time for the upstream interleaved buffer. RS can

125us 250us 500us 1ms

also be disabled.

 

 

2ms 4ms disable

Type:

Modify

--

Optional

 

 

atucdnshiftsnrmargin

Configured Signal/Noise Margin for rate downshift. If the noise margin

<atucdnshiftsnrmargin-val>

falls below this level, the modem should attempt to decrease its

 

transmit rate. In the case that RADSL mode is not present, the value

 

will be 0.

 

 

 

Type:

Modify

--

Optional

 

Valid values: 0 - 310

 

 

atucupshiftsnrmargin

Configured Signal/Noise Margin for rate upshift. If the noise margin

<atucupshiftsnrmargin-val>

rises above this level, the modem should attempt to increase its

 

transmit rate. In thecase that RADSL is not present, the value will be 0.

 

Type:

Modify

--

Optional

 

Valid values: 0 - 310

 

 

atucminupshifttime

Minimum time that the current margin is above UpshiftSnrMgn before

<atucminupshifttime-val>

an upshift occurs. In the case that RADSL is not present, the value will

 

be 0.

 

 

 

 

Type:

Modify

--

Optional

 

Valid values: 0 - 16383

 

 

atucmindnshifttime

Minimum time that the current margin is above UpshiftSnrMgn before

<atucmindnshifttime-val>

an upshift occurs. In the case that RADSL is not present, the value will

 

be 0.

 

 

 

 

Type:

Modify

--

Optional

 

Valid values: 0 - 16383

 

 

atucfastmintxrate

Configured Minimum Transmit rate for 'Fast' channels, in bps. Also

<atucfastmintxrate-val>

refer to 'adslAtucConfRateChanRatio' for information regarding RADSL

 

mode and refer to ATU-R transmit rate for ATU-C receive rates.

 

Type:

Modify

--

Optional

 

Valid values: 0 - 0xffffffff

 

 

atucintlmintxrate

Configured Minimum Transmit rate for 'Interleave' channels, in bps.

 

 

 

 

 

IP DSLAM

283