
Output:
Tracing route to [192.168.1.13]
Over a maximum of 30 hops
1 | 0.000000 ms 0.000000 ms 0.000000 ms 192.168.1.13 |
Trace complete.
Output Fields:
FIELD |
|
| Description |
|
|
|
|
1 |
|
| This denotes the hop counter value. |
|
|
|
|
|
| These are the Round trip timings of the 3 probe packets sent. A * denotes that | |
|
| this probe was missed. | |
|
|
| |
|
|
|
|
5 |
|
| This is the ip address of the intermediate/destination node. |
|
|
|
|
References: ping command.
5.28.2.6 VerboseDescription:
Using this command, a user can view the status of entries before and after the execution of a command (create, delete, modify,get). However if this mode is turned off, then display only shows the final result of execution of command, i.e. whether it was successful or failure.
Command Syntax:
Verbose [on off]
Parameters:
Name | Description |
|
|
| Used for switching on the verbose mode. |
On | Type: Optional |
| Valid values: On. |
|
|
| Used for switching off the verbose mode. |
Off | Type: Optional. |
| Valid values: Off |
|
|
Mode:
692 | IDL series User Guide |
|
|