Planet Technology IDL-2400, IDL-2401, IDL-4800, IDL-4801 manual 353

Output:

Verbose Mode On

Entry Created

Profile Name		: IGMP
Node Id		: 3
Exported		: true			Node Type		: Binary
Modification Mask : Act
Action		: eq
Value Type		: u16			Offset	: 12
Mask		: 0xffff
Value		: 0x800
Value End		: None
Set Base type		: none
Shift Count		: none			Multiplier	: none
Description		: Node to match the ip address
Verbose Mode Off:
Entry Created
Output field:
	Field			Description
	Profile Name		Name of the classifier profile
	Node Id		Node Id, should be unique within a profile
	Exported		This specifies what fields of an exported node are modifiable
			and can be modified while the profile is part of a classifier tree.
	Node Type			This specifies the type of the Classifier node
	Modification Mask			This specifies what fields of this nodes can be modified, if this
				node is an exported node.
	Action			Action tells what is to be done by a node.
	Value Type		Value type tells the type of value, which is to be matched/set.
			For leaf type nodes this field is not valid. if ActVal is SetBase and
			SBaseType is Compute then this value is used to specify the
			value type (U8, U16, U32), which shall be used to compute the
			new base offset. This field is not valid for other values of
			SBaseType.
	Offset			OffSet, in the packet with respect to the base offset, from where
				we have to take the value, which is to be matched. If ActVal is
				SetBase and SBaseType is Compute then this value is used to
				specify the offset with respect to the base offset, which shall be
				used to specify the field of the packet used to compute the new

IP DSLAM 353