
Parameters:
| Name | Description | 
| 
 | 
 | 
| ifname | The PPPR interface. | 
| Type: Create - Mandatory | |
| 
 | Delete - Mandatory | 
| 
 | Modify - Mandatory | 
| 
 | Get - Optional | 
| 
 | Valid values: 0 - 254 | 
| 
 | 
 | 
| lowif  | This specifies the name of the lower AAL5 | 
| 
 | interface. | 
| 
 | Type: Create -Mandatory | 
| 
 | Valid values: 0 - 574 | 
| 
 | 
 | 
| maxpdu  | This specifies the maximum PDU size on a PPPR | 
| 
 | interface. | 
| 
 | Type: Create - Optional | 
| 
 | Valid values: 0 - 1492 | 
| 
 | Default value: 1492 | 
| 
 | 
 | 
| ppprackto | Time in seconds to wait for LCP terminate Ack, | 
| after sending a terminate request. | |
| 
 | Type: Create - Optional | 
| 
 | Modify - Optional | 
| 
 | Valid values: 0  | 
| 
 | Default value: 5 | 
| 
 | 
 | 
| lowiftoggletimerto | Time in seconds to wait for lowif to come up | 
| without tearing down the pppr session. | |
| 
 | Type: Create - Optional | 
| 
 | Modify - Optional | 
| 
 | Valid values: 0 – 10 | 
| 
 | Default value: 5 | 
| 
 | 
 | 
| nature dynamic | Specifies if the interface is dynamic or static in | 
| static | nature. | 
| 
 | Type: Create - Optional | 
| 
 | Modify - Optional | 
| 
 | Default value: Dynamic | 
| 
 | 
 | 
| configstatus Normal | This mode describes the configuration status for | 
| Config | the interface. If the "config" bit is set, this interface | 
| 
 | shall be created, but will have a dormant status. | 
| 
 | Only after the receipt of an pppoa packet from the | 
| 
 | CPE side, this interface shall become active. | 
| 
 | Type: Create - Optional | 
| 
 | 
 | 
| IP DSLAM | 509 | 
| 
 | 
 |