| recommended to keep the value for this different from |
| ProtocolId value defined for 802.1q Vlan(0x8100). This |
| attribute is applicable only in 'VLAN Stacking mode'. |
| Type: Modify - Optional |
| Valid values: 0x8100 - 0xFFFF |
|
|
tvlanprotocolid | This specifies the ProtocolId value to be used for Stacked |
Vlan/Service Vlan/Provider Vlan/Second Vlan tag. It is | |
| recommended to keep the value for this different from |
| ProtocolId value defined for 802.1q Vlan (0x8100). This |
| attribute is applicable only in 'VLAN Stacking mode'. |
| Type: Modify - Optional |
| Valid values: 0x8100 - 0xFFFF |
|
|
tvlanid | This specifies the ProtocolId value to be used for Stacked |
| Vlan/Service Vlan/Provider Vlan/Second Vlan tag. It is |
| recommended to keep the value for this different from |
| ProtocolId value defined for 802.1q Vlan(0x8100). This |
| attribute is applicable only in 'VLAN Stacking mode'. |
| Type: Modify - Optional |
| Valid values: 0 - 4095 |
|
|
abondglbctrlvpi | This VPI value will be used for the control channel which will |
be created to run the ATM based multi pair bonding | |
| protocol. This is a system wide parameter and applies to all |
| the abond group interfaces which can be created in the |
| system. Change in this value will be applied at next boot |
| only. |
| Type: Modify - Optional |
|
|
abondglbctrlvci | This VCI value will be used for the control channel which will |
be created to run the ATM based multi pair bonding | |
| protocol. This is a system wide parameter and applies to all |
| the abond group interfaces which can be created in the |
| system. Change in this value will be applied at next boot |
| only. |
| Type: Modify - Optional |
|
|
abondglbsidfmt | This SID Format value will be used for all the Abond Group |
EightBitSid | Interfaces which can be created in the system. Change in |
TwelveBitSid | this value will be applied at next boot only. |
| Type: Modify - Optional |
|
|
Example:
$ get nbsize
IP DSLAM | 623 |
|
|