5.6 Bridging Commands
5.6.1 Bridge forwarding Commands
5.6.1.1 Get bridge forwarding
Description:
Use this command to get.
Command Syntax:
get bridge forwarding [vlanid <vlanid-val>] [macaddr <macaddr-val>]
5.6.1.2 Delete bridge forwarding
Description:
Use this command to delete.
Command Syntax:
delete bridge forwarding [vlanid <vlanid-val>] [macaddr <macaddr-val>]
Parameters:
Name | Description |
|
|
vlanid | Vlan Id to uniquely identify the entry for which the bridge has forwarding and/or |
| filtering information. To delete an individual learnt entry or all learnt entries, the |
| FdbId should be set to a valid value in case of IVL. In SVL case, this value is |
| ignored except when the value is 4097 which is the value of a special Vlan Id |
| used for managing the traffic for those VLANs that are neither created nor |
| learnt in the system. When Vlan transparency feature is supported, the valid |
| range for this also includes 4097. VLAN here means the 802.1q Vlan in case of |
| Native Vlan mode and Virtual Vlan in case of Stacked Vlan Mode. |
| Type: Delete － Optional |
| Get － Optional |
| Valid values: 0 - 4095 |
|
|
macaddr | A unicast MAC address for which the bridge has forwarding and/or filtering |
information. In the case of "delete all" entries in a given FDB; the MacAddr shall | |
| have INVALID value specified by FF: FF: FF: FF: FF: FF. To delete an |
| individual entry, valid value of Mac address has to be specified. |
| Type: Delete － Optional |
| Get － Optional |
|
|
IP DSLAM | 173 |
|
|