Description:
Use this command to reset some parameters of queue. This command will reset the following parameters of queue.
z Set DropCount value to zero.
zSet watermark value to the value of the currently used size of queue .
zSet ThresholdCount value to the zero.
Command Syntax:
Reset rmon queue
Parameters:
None
Example:
$ reset rmon queue
Output Field:
None
5.22.5RMON Net buffers Info Commands5.22.5.1Get rmon netbufDescription:
Use this command to get the information about all the net buffers present in the system.
Command Syntax:
get rmon netbuf
Parameters
None
Example:
$ get rmon netbuf
576 | IDL series User Guide |
|
|