
Command Syntax:
create ipoa intf ifnameNormal Config] [enabledisable]
5.16.3.3 Delete ipoa intfDescription:
Use this command to delete.
Command Syntax:
delete ipoa intf ifnameDescription:
Use this command to modify.
Command Syntax:
modify ipoa intf ifname 
Parameters:
| Name | Description | 
| 
 | 
 | 
| ifname | The Ipoa Interface | 
| Type: Create - Mandatory | |
| 
 | Delete - Mandatory | 
| 
 | Modify - Mandatory | 
| 
 | Get - Optional | 
| 
 | Valid values: 0  | 
| 
 | 
 | 
| lowif  | This specifies the name of the lower AAL5 interface. | 
| 
 | Type: Create - Mandatory | 
| 
 | Valid values: 0 - 574 | 
| 
 | 
 | 
| configstatus Normal | This mode describes the configuration status for this | 
| Config | interface. If the "config" bit is set then this interface | 
| 
 | shall be created but will have a dormant status. Only | 
| 
 | after the receipt of an Ipoa packet from CPE side | 
| 
 | this interface shall become active. The  | 
| 
 | |
| 
 | |
| 
 | |
| 
 | Type: Create - Optional | 
| 
 | Default value: NormalEntry | 
| 
 | 
 | 
| 476 | IDL series User Guide | 
| 
 | 
 |