3.6 System
This section allows users to perform commit and reboot that will be introduced as follows.
3.6.1 Commit and Reboot
This section describes how to commit the current configuration to flash or reboot the IP DSLAM. Double Click on “Commit and Reboot” from the Function List Window. The System Information screen appears as follows.
a. If to commit the active configuration to the flash, click on 
.
b. If to reboot the system and to set the boot configuration, click on 
.
c. Click on 
to close the window.
IP DSLAM | 61 |
|
|