PPPOE-191.

 

 

 

 

Type:

Create

--

Mandatory

 

 

Delete

--

Mandatory

 

 

Get

--

Optional

 

 

value <value-val>

List Entry Value, for the generic filter generic list. This value

 

must be consistent with the mentioned valuetype of generic list.

 

Type:

Create

--

Mandatory

 

 

Delete

--

Mandatory

 

 

Get

--

Optional

 

 

valtype U8 U16 U32

This field specifies value type of the entry. The value type for all

 

entries on an interface should be same. Value type should

 

match value type of subrule field for which comparsion type is

 

ingenlist or notingenlist incase the rule containing the subrule is

 

attached on the same interface. It should be 'U32' in case a rule

 

containing IP subrule or Generic subrule with cmptype as

 

InGenList or NotInGenList is attached on same interface.

 

Currently only 'U32' value is supported.

 

Type:

Create

--

Optional

 

Default value: U32

 

 

 

 

 

 

 

 

Example:

$ create filter list genentry ifname eoa-1 value 0xAC1901AA valtype u32

Output:

Verbose Mode On

Entry Created

IfName : eoa-1

Value : 0xAC1901AA

Value Type : u32

Verbose Mode Off:

Entry Created

Output field

Field

Description

 

 

IfName

Name of ethernet, eoa, ipoe or pppoe interface, for which the generic filter

 

generic list is created. Valid values for the field are between EOA-0 and

 

EOA-23 or between eth-0 and eth-1or between IPOE-0 and IPOE-191 or

 

between PPPOE-0 and PPPOE-191.

 

 

Value

List Entry Value, for the generic filter generic list. This value must be

 

 

372

IDL series User Guide