Type:

Create

--

Optional

 

 

Modify

--

Optional

 

Valid values: 0 - 64

 

 

 

Default value: -----

 

 

 

 

Valuetype valuetype

Value type tells, the type of value which is to be

 

matched/set. For leaf type nodes this field is not

 

valid. If gsvClfrProfileNodeAction is SetBase and

 

gsvClfrProfileNodeSetBaseType is Compute then

 

this value is used to specify the value type (U8, U16, U32), which

 

shall be used to compute the new base offset. This field is not

 

valid for other values of

 

 

gsvClfrProfileNodeSetBaseType.

 

Type:

Create

--

Optional

 

 

Modify --

Optional

 

Default value: -----

 

 

 

 

sbvarindex

This specifies setbase variable index. This field is valid only if

L2StartL3Start

'SetBaseType' is 'SetFromVar'. 'L2Start' is read-only containing

 

Layer 2 header start offset. 'L3Start' is read-only containing Layer

 

3 header start offset. It should be ensured that packet is IP packet

 

before using 'L3Start' value

 

.Type:

Create

--

Optional

 

 

Modify

--

Optional

 

Default value: Invalid

 

 

 

nodeprio

This specifies the priority of profile node. Based on this priority

LowHighAsInTree

value, the profile node is created in fast or slow memory. In case

 

priority is specified as 'AsInTree', node priority will be same as

 

specified in the tree.

 

 

 

Type:

Create

--

Optional

 

 

Modify

--

Optional

 

Default value: AsInTree

 

 

 

 

 

 

 

Example:

$ create clfr profile node pname IGMP nodeid 1 ntype binary actval eq valuetype u16 value 0xffff offsetval 12 maskval 0xffff

352

IDL series User Guide