
| 
 | Type: | Modify | Optional | |
| 
 | 
 | |||
| atucgsbitswap Disable | This parameter enables/disables bit swapping | |||
| Enable | Type: | Modify | Optional | |
| 
 | 
 | |||
| atucgsntr LocalOcs | This parameter enables/disables NTR on a per chip basis | |||
| Refck8K | Type: | Modify | Optional | |
| 
 | 
 | |||
| atucgsalctlusver Unknown | For T1.413 demo purposes only | |||
| 
 | Type: | Modify | Optional | |
| 
 | 
 | |||
| atucgsusecustombin Enable | This parameter enables/disables user selection which of the 511 bins | |||
| Disable | will be enabled for upstream and downstream transmission. | |||
| 
 | Type: | Modify | Optional | |
| 
 | 
 | |||
| atucgsdnbinusage | '1' in bit position indicates usage of corresponding bin,whereas a '0' | |||
| disables usage of corresponding bin. | ||||
| 
 | Type: | Modify | Optional | |
| 
 | 
 | |||
| atucgsmaxdco 64 128 256 | Maximum interleaving depth supported by the customer's hardware | |||
| 511 | Type: | Modify | Optional | |
| 
 | 
 | |||
| atucgsfullretrain Enable | Indicates enable/disable of auto retrain capability | |||
| Disable | Type: | Modify | Optional | |
| 
 | 
 | |||
| atucgspsdmasktype | This parameter selects the PSD mask option to be used | |||
| CoMsk2 FlatMsk CabMsk2 | Type: | Modify | Optional | |
| CoMsk2Rfi FlatMskRfi | 
 | 
 | 
 | 
 | 
| CabMsk2Rfi CoMsk2Rfi0 | 
 | 
 | 
 | 
 | 
| Adsl2NonovlpM1 | 
 | 
 | 
 | 
 | 
| Adsl2NonovlpM2 | 
 | 
 | 
 | 
 | 
| Adsl2NonovlpFlat | 
 | 
 | 
 | 
 | 
| 
 | 
 | |||
| atucgseraseprofs enable | This parameter enables/disables the ability to erase all fast retrain | |||
| disable | profiles at startup | 
 | ||
| 
 | Type: | Modify | Optional | |
| 
 | 
 | |||
| atucgsextrsmemory | Indicates whether customer's Hardware uses external RS RAM | |||
| notpresent present | Type: | Modify | Optional | |
| 
 | 
 | |||
| paramhybridlossteststart | Start bin for range of bins to be measured. The default value mentioned | |||
| is an indicative value only, for exact value refer to document number | ||||
| > | ||||
| 
 | Type: | Modify | Optional | |
| 
 | Valid values: 0x0 - 0x1ff | |||
| 
 | 
 | |||
| paramhybridlosstestend | End bin for range of bins to be measured. | |||
| Type: | Modify | Optional | ||
| > | Valid values: 0x0 - 0x1ff | |||
| 
 | 
 | |||
| dmttrellis on off | This parameter enables/disables trellis coding. Trellis coding should | |||
| 
 | always be enabled for its clear performance advantage. | |||
| 
 | Type: | Modify | Optional | |
| 
 | 
 | 
 | 
 | 
 | 
| 286 | IDL series User Guide | 
| 
 | 
 |