Planet Technology IDL-2400, IDL-2401, IDL-4800, IDL-4801 orl, oamsrc, maxvcibits, profilename, Parameters:, Description:, Description:, Command Syntax:, Command Syntax:, trfclassprofileid, 5.5.4.3 Delete atm port

5.5.4.3 Delete atm port

Description:

Use this command to delete.

Command Syntax:

delete atm port ifname <interface-name>5.5.4.4 Modify atm port

Description:

Use this command to modify.

Command Syntax:

modify atm port ifname <interface-name>[maxvc <maxvc-val> ] [ maxvpibits

<maxvpibits-val> ] [ maxvcibits <maxvcibits-val> ] [ oamsrc <oamsrc-val> ] [ orl

<orl-val> ] [ trfclassprofileid <trfclassprofileid-val> ] [ profilename

<profilename-val> ] [ atmtransporttype cell packet ] [ enable disable ]

Parameters:

Name	Description
ifname	Physical interface index
<interface-name>	Type: Create － Mandatory
	Delete － Mandatory
	Modify － Mandatory
	Get － Optional
lowif <lowif-val>	This is the IfIndex of the low interface on which this ATM port is
	configured. Lower interface can be of type dsl-* or dsli-* or dslf-* or
	abond-*
	Type: Create － Mandatory
maxvc <maxvc-val>	This specifies the maximum number of VCCs (PVCCs), supported at
	this ATM interface. This field is not valid if the atmtransporttype has the
	value packet
	Type: Create － Optional
	Modify － Optional
	Valid values: 1 -8
	Default value: 8
maxvpibits	The maximum number of active VPI bits configured for use at the ATM
<maxvpibits-val>	interface.
	Type: Create － Optional

IP DSLAM 159