floodsupport enable

This is used to specify whether the unknown unicast packets are to be

disable

flooded or not. The value for this is used along with per vlan

 

configuration for flood support to determine if flooding has to be done

 

for unknown unicast packet.

 

Type : Optional

 

Valid Values: enable disable

 

 

bcastsupport

This is used to specify whether the broadcasting is supported or not.

enabledisable

The value for this is used along with per vlan configuration broadcast

 

support, to determine if broadcasting has to be done for the broadcast

 

packet.

 

 

 

mcastsupport

Used to specify whether the multicast is supported or not.

enabledisable

Type

: Optional

 

Valid Values: enable disable

 

 

mcastdrop

Used to specify whether the multicast packets are to be dropped, or to

enabledisable

be forwarded, if multicast is not supported. This is only valid if

 

dot1dTpMcastSupport is false.

 

Type

: Optional

 

Valid Values: enabledisable

 

 

dropiffdbfull enable

This specifies if the frame for which learning could not be done

disable

because of forwarding table limit being reached, is to be dropped. If this

 

is enabled the frame for which learning could not be done because of

 

limit exceeded shall be dropped, else forwarded based on bridge

 

forwarding logic.This being enabled shall reduce flooding, as when a

 

response to such a frame from which learning could not be done shall

 

come the frame shall be flooded, as the entry for that unicast address,

 

shall not be found in forwarding table.

 

Type

: Optional

 

Valid Values: enable or disable

 

Default value: enable

 

 

resnetlearning enable

This specifies if learning can be done over net side port for residential

disable

bridging. Learning shall be done on Net port in case of vlan with

 

residential bridging if 'dot1dPortGsLearningStatus' and

 

'dot1dTpGsResidentialNetLearning'is enabled. In case of vlan with

 

'unrestricted' or 'restricted' bridging the learning is governed only by per

 

port configuration i.e. 'dot1dBasePortTable'. Currently the modification

 

of this parameter is not supported.

 

Type

: Optional

 

Valid Values: enable or disable

 

Default value: enable

 

 

resvmacprofileid

The Profile is used to determine the behavior for Reserved Mac

 

 

 

206

IDL series User Guide