| bridge port is disable (2), then OperStatus of the port should be disable |
| (2). If AdminStatus of the bridge port is changed to enable(1), then |
| OperStatus of the port should change to enable(1) if the bridge port is |
| ready to transmit and receive network traffic. The bridge port will have |
| the OperStatus value as dormant (5) if the 'configstatus' of the bridge |
| port is 'config' and it is waiting for a packet to be sensed, on its lower |
| interface index, to get activated. |
|
|
Port Admin Status | The desired state of the bridge port. On creation the bridge port shall |
| be created in enabled AdminStatus by default. |
|
|
Sticky Status | Indicates if the port has been set as sticky. The value enable(1) |
| indicates that the entries learnt on this port won't be aged out. It also |
| indicates that the entries learnt on this port shall not be learnt on any |
| other port. The entries learnt on this port can only be removed by |
| management action or by making the value as disable (2) so that the |
| entries can be aged out. This field is unused if the bridge port is |
| created over an PPPOE/ IPOE interface or PPPOE/IPOE is sensed. |
| Any value of this field shall be ignored for a bridge port created over a |
| PPPOE/IPOE interface. |
|
|
FDB Modify | This specifies whether this port can overwrite an existing forwarding |
| database entry. This field is unused if the bridge port is created over an |
| PPPOE/ IPOE interface or PPPOE/IPOE is sensed. Any value of this |
| field shall be ignored for a bridge port created over a PPPOE/IPOE |
| interface. |
|
|
Acl Global Deny Apply | This specifies whether the global acl macentry deny list represented by |
| MO AclGlobalMacList is to be applied to this port or not. The default |
| value of this parameter shall depend on the port type. For Net side |
| ports, the default value shall be disable and for the cpe side ports the |
| default value shall be enable. This field is unused if the bridge port is |
| created over an PPPOE/IPOE interface or PPPOE/IPOE is sensed. |
| Any value of this field shall be ignored for a bridge port created over a |
| PPPOE/IPOE interface. |
|
|
Acl Global Track Apply | This specifies whether the global acl macentry track list represented by |
| MO AclGlobalMacList is to be applied to this port or not. The default |
| value of this parameter shall depend on the port type. For Net side |
| ports, the default value shall be disable and for the cpe side ports the |
| default value shall be enable. This field is unused if the bridge port is |
| created over an PPPOE/IPOE interface or PPPOE/ IPOE is sensed. |
| Any value of this field shall be ignored for a bridge port created over a |
| PPPOE/IPOE interface. |
|
|
ProxyArpStatus | The Proxy Arp Status on this bridge port. The value enable of this field |
|
|
IP DSLAM | 187 |
|
|