
Output field:
| Field | Description | 
| VLAN Name | An administratively assigned string, which may be used | 
| 
 | to identify the VLAN. This is mandatory in the case of | 
| 
 | create cmnd. In case of get/modify/delete - either vlan | 
| 
 | name or vlan id can be given. | 
| 
 | 
 | 
| VLAN Index | The VLAN Identifier. GS_UNREGISTERED_VLANID is | 
| 
 | a special Vlan Id used for managing the traffic for those | 
| 
 | VLANs that are neither created nor learned in the | 
| 
 | system. The valid range for this field also includes | 
| 
 | GS_UNREGISTERED_VLANID besides the range | 
| 
 | |
| 
 | 
 | 
| Egress ports | The set of ports, which are permanently assigned to the | 
| 
 | egress list for this VLAN by management | 
| 
 | 
 | 
| Forbidden Egress Ports | The set of ports which are prohibited by management | 
| 
 | from being included in the egress list for this VLAN. | 
| 
 | 
 | 
| Untagged Ports | The set of ports, which should transmit egress packets | 
| 
 | for this VLAN, as untagged. | 
| 
 | 
 | 
| Bridging Mode | This specifies the state of full bridging for the VLAN. | 
| 
 | There can be three values associated with this, based on | 
| 
 | global fullBridgingStatus. These values can be restricted | 
| 
 | bridging, unrestricted full bridging and residential | 
| 
 | bridging. If the user does not specify the bridging mode | 
| 
 | at the time of VLAN creation, the VLAN inherits the | 
| 
 | globally set bridging mode. The user can modify bridging | 
| 
 | mode for a created VLAN. If the dynamic entry for the | 
| 
 | VLAN to be created already exists, the user can only | 
| 
 | specify globally set bridging mode for this VLAN. The | 
| 
 | bridging modes are defined as Restricted Full Bridging, | 
| 
 | Unrestricted full bridging and Resedential bridging. The | 
| 
 | default residential VLAN, like any other residential VLAN | 
| 
 | allows only one net side bridge port as its member. This | 
| 
 | port shall be added automatically to the default VLAN if it | 
| 
 | is the only net side bridge port being added to the VLAN. | 
| 
 | Subsequently, the user can add another net side port to | 
| 
 | the egressportslist and untaggedportslist only after | 
| 
 | removing the previously added net side bridge port. | 
| 
 | Unrestricted bridging is not applicable for bridge ports | 
| 
 | created over the PPPoE interface even though the VLAN | 
| 
 | may be unrestricted. | 
| 
 | 
 | 
| 668 | IDL series User Guide | 
| 
 | 
 |