the profile. For PP scheduling algorithm, it is ignored.

For Custom scheduling algorithm, this parameter specifies the Maximum bandwidth limit in Kbps for the class. Value zero means no maximum bandwidth limit for the class.

This specifies the fourth parameter for the class

queue that is used in the scheduling algorithm of

Profile Class Param4

the profile. For PP and Custom scheduling algorithms, it is ignored. The default value listed is only an indicative value.

This specifies the fifth parameter for the class

queue that is used in the scheduling algorithm of

Profile Class Param5

the profile. For PP and Custom scheduling algorithms, it is ignored. The default value listed is only an indicative value.

References:

zScheduling profile related commands

5.21.9Scheduling profile info Commands5.21.9.1 Get sched profile info

Description:

Use this command to get.

Command Syntax:

get sched profile info [name <name-val>]5.21.9.2 Create sched profile info

Description:

Use this command to create.

Command Syntax:

create sched profile info name <name-val> [algo pp custom] iftype eth atm

IP DSLAM

555