seqid <seqid-val>

Sequence Id of the sequence

 

Type: Create -- Mandatory

 

Delete -- Mandatory

 

Modify -- Mandatory

 

Get --Optional

 

Valid Values: 1-65535

ifname

The name of the interface whose mapping is being created. Only EoA, PPPoE,

<interface-name>

and Ethernet interfaces are allowed. If the value of this field is 'alleth', it

 

indicates all 'Ethernet' interfaces. If the bridge port is created over the

 

aggregated interface, then this field cannot have IfIndex of any specific

 

Ethernet interface. If the bridge port over the aggregated interface is not

 

created, then this field cannot have the value 'alleth'. This field should not be

 

specified during creation of an entry in this table and must be specified during

 

modify of an entry in this table.

 

Type: Create -- Optional

 

Modify -- Optional

stageid <stageid-val>

Identifier of the stage on the interface for which the sequence is being

 

applied.This field should not be specified during creation of an entry in this

 

table and must be specified during modify of an entry in this table

 

Type: Create -- Optional

 

Modify -- Optional

 

Valid values: 1-2

 

Default Value:1

seqdir in out

This field specifies whether the sequence to be applied in ingress direction or

 

egress direction on the interface.This field should not be specified during

 

creation of an entry in this table and must be specified during modify of an entry

 

in this table.

 

Type: Create -- Optional

 

Modify -- Optional

 

Default value: In

Example:

$ create filter seq info seqid 1 ifname eoa-0 stageid 1 seqdir 1

Output:

Verbose Mode On

Entry Created

Sequence Id : 1

Verbose Mode Off:

Entry Created

396

IDL series User Guide