5.5.5.4 Modify atm vc intf

Description:

Use this command to modify ATM VC parameters.

Command Syntax:

modify atm vc intf ifname <interface-name> [vpi <vpi-val>] [vci <vci-val>] {enable disable} [a5txsize <aal5-cpcs-tx-sdu-size>] [a5rxsize

<aal5-cpcs-rx-sdu-size>] [vcmux llcmux auto ethernet] [ mgmtmode data mgmt DataAndMgmt raw] [ autosupportedprot none{pppoa eoa ipoa}+] [ autovcmuxforcedprot None pppoa eoa ipoa] [ autosensetriggertype dynamic opstatechange ]

Parameters:

Name

Description

 

 

ifname

This specifies name of VC Interface.

<interface-name>

Type: Create – Mandatory

 

Delete – Mandatory

 

Get – Optional

 

Modify – Mandatory

 

Valid values : aal5-0 - *

 

 

lowif

Interface Index of the ATM port, on which this VC is getting configured.

<atm-port-interfacenam

Type: Mandatory

e>

Valid values : atm-0 - *

 

 

vpi <vpi-val>

Virtual Path Identifier. In order to modify, the VPI value shall be the new

 

VPI value and the admin status of VC interface shall be disabled. Also,

 

the VPI and VCI value cannot be modified along with admin status in

 

one command. If encaptype is Ethernet than value of this field has to be

 

0.

 

Type : Create – Mandatory

 

Modify – Optional

 

Valid values : 0-2^8

 

 

vci <vci-val>

Virtual Circuit Identifier. In order to modify, the VCI value shall be the

 

new VCI value and the admin status of VC interface shall be disabled.

 

Also, the VPI and VCI value cannot be modified along with admin status

 

in one command. If encaptype is Ethernet than value of this field has to

 

be 0.

 

Type: Create – Mandatory

 

Modify – Optional

 

Valid values : 1-2^16

 

 

164

IDL series User Guide