3.7 Configuration
This section describes how to configure the IP DSLAM by selecting Configuration from Function List window.
3.7.1 VLAN
Allow user to view and modify VLAN configuration. Double Click on “VLAN” from the Function List Window. The VLAN configuration window appears as follows.
Field | Definition | |
| The VLAN id for this VLAN. In devices supporting | |
| "Shared Vlan for multicast" capability, the information for | |
| a multicast mac addr is shared across vlans hence vlan id | |
VLAN ID | is an optional parameter. In devices supporting | |
"Independent Vlan for multicast" capability each vlan can | ||
| ||
| have its own information for a multicast mac addr hence | |
| vlanid is a mandatory parameter in all the commands | |
| other than - get. For No Vlan case vlan id is not required. | |
|
| |
VLAN Name | Name of the VLAN | |
Egress PVC | The set of ports, which are permanently assigned to the | |
egress list for this VLAN by management. | ||
| ||
Untagged PVC | The set of ports, which should transmit egress packets for | |
this VLAN, as untagged. | ||
|
62 | IDL series User Guide |
|
|