aturtargetsnrmargin

Noise Margin the modem must achieve with a BER of 10 to the power

<aturtargetsnrmargin-val>

7 or better to successfully complete initialization

 

Type:

Modify

--

Optional

 

Valid values: 0 - 0xffffffff

 

 

aturdnshiftsnrmargin

Configured Signal/ Noise Margin for rate downshift. If the noise margin

<aturdnshiftsnrmargin-val>

falls below this level, the modem should attempt to decrease its

 

transmit rate. In the case that RADSL mode is not present, the value

 

will be 0.

 

 

 

Type:

Modify

--

Optional

 

Valid values: 0 - 0xffffffff

 

 

aturupshiftsnrmargin

Configured Signal/ Noise Margin for rate upshift. If the noise margin

<aturupshiftsnrmargin-val>

rises above this level, the modem should attempt to increase itís

 

transmit rate. In the case that RADSL is not present, the value will be 0.

 

Type:

Modify

--

Optional

 

Valid values: 0 - 0xffffffff

 

 

aturminupshifttime

Minimum time that the current margin is above UpshiftSnrMgn, before

<aturminupshifttime-val>

an upshift occurs. In the case that RADSL is not present, the value will

 

be 0.

 

 

 

 

Type:

Modify

--

Optional

 

Valid values: 0 - 0xffffffff

 

 

aturmindnshifttime

Minimum time that the current margin is below DownshiftSnrMgn,

<aturmindnshifttime-val>

before a downshift occurs. In the case that RADSL mode is not present,

 

the value will be 0.

 

 

Type:

Modify

--

Optional

 

Valid values: 0 - 0xffffffff

 

 

aturfastmintxrate

Configured Minimum Transmit rate for 'Fast' channels, in bps. Also

<aturfastmintxrate-val>

refer to 'adslAturConfRateChanRatio' for information regarding RADSL

 

mode and ATU-C transmit rate for ATU-R receive rates.

 

Type:

Modify

--

Optional

 

Valid values: 0 - 0xffffffff

 

 

aturintlmintxrate

Configured Minimum Transmit rate for 'Interleave' channels, in bps.

<aturintlmintxrate-val>

Also refer to 'adslAturConfRateChanRatio' for information regarding

 

RADSL mode and to ATU-C transmit rate for ATUR receive rates.

 

Type:

Modify

--

Optional

 

Valid values: 0 - 0xffffffff

 

 

aturfastmaxtxrate

Configured Maximum Transmit rate for 'Fast' channels, in bps. Also

<aturfastmaxtxrate-val>

refer to 'adslAturConfRateChanRatio' for information regarding RADSL

 

mode and to ATU-C transmit rate for ATUR receive rates.

 

Type:

Modify

--

Optional

 

Valid values: 0 - 0xffffffff

 

 

 

 

 

IP DSLAM

287