
Parameters:
| Name | Description | 
 | 
| 
 | 
 | 
 | 
| This parameter specifies the name assigned to this interface. | ||
| > | Type: Create - Mandatory | |
| 
 | Delete - Mandatory | |
| 
 | Get - Optional | |
| 
 | Modify - Mandatory | |
| 
 | Valid values:  | |
| 
 | 
 | |
| lowif | This parameter specifies the lower interface index. It contains ifindex of | |
| the AAL5 or VC Aggregation interface. | ||
| 
 | Type: Mandatory | 
 | 
| 
 | Valid Values :  | |
| 
 | 
 | |
| pkttype {multicast | This parameter defines the packet type supported by the interface. | |
| broadcast | ‘EoAPktTypeSupported’ shall be configured for every CPE side | |
| unknownunicast}+ | Ethernet interface. By default, the option taken is 'ALL' and it means that | |
| allnone | all packets will be transmitted. The value 'None' means that normal | |
| 
 | Ucast packets will be transmitted. The interface shall not transmit any | |
| 
 | other packet type than the ones configured. | |
| 
 | Type: Optional. | 
 | 
| 
 | Valid Values: {multicast broadcast  | |
| 
 | Default Value: all. | |
| 
 | 
 | |
| fcs false true | This specifies whether Ethernet FCS needs to be computed for the CPE | |
| 
 | side Ethernet interfaces. This can be set to true only if encaptype of the | |
| 
 | lower interface is Ethernet. | |
| 
 | Type: Optional | 
 | 
| 
 | Valid Values: false or true | |
| 
 | Default Value: false. | |
| 
 | 
 | |
| Enabledisable | Administrative status of the interface | |
| 
 | Type: Optional | 
 | 
| 
 | Valid values : enable or disable | |
| 
 | Default Values: | enable | 
| 
 | 
 | |
| inactivitytmrintrvl | This field specifies the time (in seconds) after which interfaces shall be | |
| marked inactive if there is no data activity on this interface during this | ||
| 
 | interval. This is used only when the bit corresponding to "ConfigEntry" is | |
| 
 | set for gsvEoaConfigStatus field. A value of zero means the timer is not | |
| 
 | running. In Aautosensing scenario, an inactive interface is a candidate | |
| 
 | to deletion in case another protocol is sensed on Atm Vc Interface on | |
| 
 | which this interface is created. | |
| 
 | Type: Optional | 
 | 
| 
 | Valid Values: 0 | to 0xffffffff | 
| 
 | 
 | 
 | 
| IP DSLAM | 329 | 
| 
 | 
 |