
| 
 | Valid values: 1  | 
| 
 | 
 | 
| mcastcap ivmcapable | It denotes the Multicast Device Capability. If the device | 
| svmcapable none | capability is ivlcapable then svmcapable is not a valid value. | 
| 
 | If the device capability is neither ivlcapable nor svmcapable | 
| 
 | then the only valid value for this field is none. If the device | 
| 
 | capability is ivlcapable or svlcapable then this field can't | 
| 
 | have value none. ivmcapable and svmcapable can't be set | 
| 
 | together.In case of Stacked Vlan Mode this shall apply to | 
| 
 | Virtual Vlans. | 
| 
 | Type: Modify - Optional | 
| 
 | 
 | 
| ridcap irdcapable | RID refers to the Routing Information Database. This | 
| srdcapable | database contains information about the routes in the | 
| 
 | system. Each RID identifies a flow and defines route related | 
| 
 | information for that flow. The RID defines a flow based on | 
| 
 | the VLAN Id. The database can be of 2 types, | 
| 
 | IRD( Independent Routing Database) where there are more | 
| 
 | than one RIDs in the system and each RID defines separate | 
| 
 | routes in context of itself. If VlanId <X> and RID <X> have | 
| 
 | been created and the routing database is configured for | 
| 
 | IRD, than routes in RID <X> shall define flow for packets | 
| 
 | coming on VLAN Id <X>. The other mode for the database | 
| 
 | is SRD( Shared Routing Database) where there is a single | 
| 
 | RID in the system and all flows map to this RID. This RID | 
| 
 | has to be explicitly created and no more than 1 RID can be | 
| 
 | created in the system in this mode. Flows for all created | 
| 
 | VLANs shall map to this RID for routing. | 
| 
 | Type: Modify - Optional | 
| 
 | 
 | 
| maxnumac | It denotes the maximum number of Access Concentrators | 
| supported. | |
| 
 | Type: Modify - Optional | 
| 
 | Valid values: 1 - 8 | 
| 
 | 
 | 
| maxnumsrcmac | It denotes the maximum number of Source MAC addresses | 
| that can be used across the different PPPOE and IPOE | |
| 
 | interfaces. | 
| 
 | Type: Modify - Optional | 
| 
 | Valid values: 1 - 8 | 
| 
 | 
 | 
| vlanmode nativemode | Vlan Mode Type: Modify Optional | 
| stackedmode | 
 | 
| 
 | 
 | 
| svlanprotocolid | This specifies the ProtocolId value to be used for Stacked | 
| Vlan/Service Vlan/Provider Vlan/Second Vlan tag. It is | |
| 
 | 
 | 
| 622 | IDL series User Guide | 
| 
 | 
 |