5.9.3 ADSL ATUC Channel Commands5.9.3.1 Get adsl atuc channel

Description:

Use this command to get.

Command Syntax:

get adsl atuc channel [ifname <interface-name>]

Parameters:

Name

Description

 

 

ifname <fname-val>

The ADSL ATUC channel interface name.

 

Type: Get – Optional

 

Valid values: dsli-0 - dsli-23

 

 

Example:

$ get adsl atuc channel ifname dsli-0

Output:

 

 

 

 

 

 

Ifname

: dsli-0

 

 

 

 

Interleave Delay(ms) : 20

Curr Tx Rate(bps)

: 80

 

 

Prev Tx Rate(bps)

: 40

Crc Block Length(byte) : 90

 

 

Gs Curr Atm Status

: NoAtmDefect GsSymbolsPerRsWord

: 10

GsRsDepth

: 20

GsRedundantBytesPerRsCode: 100

AtucChanPerfAtmCD

: 10

AtucChanPerfAtmCU

: 10

AtucChanGsINPdn

: 10

AtucChanGsL0dn

 

: 10

AtucChanGsM0dn

: 10

AtucChanGsT0dn

 

: 10

AtucChanGsB0dn

: 10

 

 

 

 

Output Fields:

 

 

 

 

 

 

 

FIELD

 

Description

 

 

 

 

 

 

 

 

 

 

 

 

Ifname

 

The ADSL ATUC channel interface name.

 

 

 

 

 

 

 

 

 

 

 

Interleave Delay(ms)

 

Interleave delay for this channel.

 

 

 

 

 

 

 

 

 

 

 

Curr Tx Rate(bps)

 

Actual transmit rate on this channel.

 

 

 

 

 

 

 

 

 

Prev Tx Rate(bps)

 

The rate at the time of the last adslAtucRateChangeTrap

 

 

 

 

event.

 

 

 

 

 

 

 

 

 

Crc Block Length(byte)

Indicates the length of the channel data-block, on which

 

 

 

 

the CRC operates.

 

 

 

 

 

 

 

 

 

 

 

Gs Curr Atm Status

 

Indicates the current ATM Status.

 

 

 

 

 

 

 

 

 

 

 

236

IDL series User Guide